| Author | Message | ||
     Blake |
From the Buell enthusiasts and Buell racing grapevine... Want to eliminate the active intake solenoid on your 1125R? Read on.  Buell is offering a module that plugs into the connector on the Buell 1125R wiring harness that will neutralize the active intake solenoid so that the check engine light will not illuminate continuously when the solenoid is removed. A brief check engine light will still appear, but only for the specific rpm range and throttle opening that engages the solenoid, and only for a few seconds. There will also be an associated stored error code, but no long-term light or anything else that would affect actual vehicle operation. The Buell part number for this module, just a small plug/adapter, is Y0248.1AM. Please note that this is a racing "off road use" only modification, which will cause any such modified Buell 1125R to fall short of the USA sound emissions standard by a small margin. Additionally, for qualified racers Buell will offer the PCM Tool and a “Race Use” ECM which allows disabling of the active intake solenoid in the ECM and its related diagnostics – so no check engine light related to this function would ever appear at all. That option however is only available through Buell race support, which requires valid current motorcycle road racing credentials. (Message edited by Blake on June 19, 2008) | ||
| Bearly |
Thank you Blake | ||
| Mustangturbo |
Keep us posted! This sounds great.. Where can I get the eliminator for the intake solenoid? | ||
| Nxtr |
Mustang turbo you should be able to order it through your dealer... Retail is $6.02 see link http://chicagoharley.com/shop/advanced_search_resu lt.php?keywords=Y0248.1AM&osCsid=9e299f40f976ae90b 802697c9a3239b8&x=30&y=11 V/R, Nick |
