G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through September 10, 2008 » 2000 x1 engine light

« Previous Next »

Author Message   Webergeoff Posted on Tuesday, June 10, 2008 - 12:28 am:        I have a 2000 x1 and the check engine light came on. It is acting like it is only running on one cylinder sometimes. I was just wondering what things could cause the light to come on. Thanks   Bad_karma Posted on Tuesday, June 10, 2008 - 02:34 am:        Geoffery You need to check the trouble codes. Just short pins one and two of the diagnostic connector and turn the bike on. After the rapids flash the next flashes will be the two digit code for historic faults. A manual is a great help here. Joe   Old_mil Posted on Saturday, August 02, 2008 - 11:16 am:        Mine seems to be doing the same thing. I'm going to check the engine codes today. Meanwhile, it looks like the battery is a bit weak so I'm charging it up as well.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: