Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Sunday, June 08, 2008 - 11:47 pm: |
|
Long story short...I tried once again to conquer mud. This time, mud reigned victorious. Bike slammed down pretty hard on it's left side and then came to rest one hundred eighty degrees opposite the direction of travel...on it's right side. We were in the MIDDLE OF NOWHERE, so imagine my dismay once I determined that the left side foot peg assembly had cracked in two places, sheered two bolts in the frame and was no longer attached to the bike. Did I mention we were in the middle of nowhere? From what I'm told, my Triple Lindy off the bike was in the high nines Fortunately, I was riding with some fantastic guys who were prepared for the worst and got me back on the road. Here's the temporary fix; These two straps took me 100 miles to my new destination...my parents garage. I have no place to wrench on the bike in NYC so I figured I might as well get the bike to the same venue as my toolbox.
These are the two bolts that sheered off:
I will have to try to remove them with an easy-Out tomorrow. Once those two bolts are removed, it'll only take a couple of parts to get back together. Hopefully, the bolts will cooperate with the Easy-Out. Collateral Damage...the least of my worries.
It's going to take some days to get the parts, and I have a 12 day trip beginning Sunday (a week from today). Hopefully, the parts will be delivered and waiting for me when I return from said trip. I was planning to leave for Homecoming just two days after my return. The timing will be tight. And to think I thought today had gotten off to a bad start when I lost one of the two bolts holding the beak/GME Piaa light bar in place. Thankfully, there were plenty of Zip-Ties on hand. Guess I forgot the Loctite! Tipsy (Message edited by tipsymcstagger on June 09, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Prowler
| Posted on Monday, June 09, 2008 - 07:18 am: |
|
Tipsy, Those screws had loctite on them on my bike when I had to remove them. You might want to heat up the frame a bit with a blow dryer or heat gun to soften up the loctite a little prior to backing them out. (makes it a whole lot easier) Nice job with the straps, by the way. I may have to pack a couple of those in my luggage from now on just for that purpose..... |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Khelton
| Posted on Monday, June 09, 2008 - 08:37 am: |
|
Ladies, our Ulys are not offroad bikes..no matter how badly we wish they were. When they go down , they go down fast and hard...especially if you have done any dirtbike riding in your life because what they do is totally unexpected. For instance, going through a mud puddle, old habit is to go around the edge because it is not as deep, unfortunately it also isn't flat, angled, there are no side knobs on Uly tires so the front end immediately washes out. They are geared too tall stock so ya do things a little faster than ya want to and the steering angle is too steep to be an actual dirt bike. Don't be offended, they just aren't dirtbikes. ( By the way, I have a new gear shift assembly if ya need one and those pegs and subassembly parts ain't gonna be cheap :-) ) ) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Old_mil
| Posted on Monday, June 09, 2008 - 08:46 am: |
|
Sorry to hear about your misfortune, hope it doesn't interfere with the homecoming trip. Email me your address if you're interested in a pair of Uly mirrors that I just took off my bike (an 07, I put Tunon mirrors on there) for the cost of shipping. applemac_g4@hotmail.com |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Old_mil
| Posted on Monday, June 09, 2008 - 08:52 am: |
|
...by the way, do you need stock pegs? I put Touratech ones on. I can throw those in the box as well. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Miamiuly
| Posted on Monday, June 09, 2008 - 10:30 am: |
|
If I admit that it isn't a dirtbike, can I still treat it like one sometimes since I own it? It does a good imitation within reason and pushing limits when you have friends to bail you out is part of the fun. I did buy a used ktm125 for some actual mud work. And to be fair, the first time I dropped the uly was while skirting the edge of a grey marl puddle. Beyond slippery. So there is that. Heating the frame should help the bolts come out as said above. Hell letting the bike idle a while should get the heating started then maybe the hair dryer. (Message edited by miamiuly on June 09, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Electraglider_1997
| Posted on Monday, June 09, 2008 - 10:51 am: |
|
Triple Lindy. Rodney Dangerfield in "Back to School". Great movie as were all the Rodney D movies I've seen. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Chadhargis
| Posted on Monday, June 09, 2008 - 12:04 pm: |
|
Thanks for reminding me of why I don't like taking an $11k+ dollar, 500+lb bike through the mud. ![: )](http://www.badweatherbikers.com/buell/clipart/happy.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Miamiuly
| Posted on Monday, June 09, 2008 - 12:20 pm: |
|
Last I checked, a decent new dirtbike cost around $7000.00 plus. Not really THAT big a difference, especially if one bought their uly used, which I didn't. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Monday, June 09, 2008 - 12:20 pm: |
|
A little good news...the two sheered bolts are out! The one that didn't break off cleanly was a bit of a bitch to drill, but I got it eventually. Pneumatic drills rock! By the way Prowler...thankfully, there was no Loctite on these. They came out rather easily once drilled. FYI...Size #1 Easy-Out did the trick with a #40 drill bit for a pilot hole. Khelton...probably just semantics, but we weren't off road. We were on a dirt road that just happened to become a mud pit in the wake of a thunderstorm But I was having second thoughts as I progressed up the "road." Should have listened to my gut. Old_mil...yes, I would greatly appreciate your old mirrors and will gladly cover the shipping! Email has been sent. Thank you VERY much! Headed for the train back to the city in a bit and will look up the necessary part numbers as soon as I get to my apartment. Tipsy (Message edited by tipsymcstagger on June 09, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Diablobrian
| Posted on Monday, June 09, 2008 - 12:42 pm: |
|
Better not tell Cityxslicker that his bike isn't a real dirt bike...He'll be heartbroken to find out that He has been using it all wrong.![](http://www.badweatherbikers.com/buell/clipart/bigwink.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Khelton
| Posted on Monday, June 09, 2008 - 02:29 pm: |
|
MiamiUly - You're right, it is tempting to use it as a dirtbike and unfortunately I doubt I will stop succumbing to that temptation completely. Tipsymcstagger - I see and did the same thing. Technically I wasn't "offroad" although the "road" I was on sure felt more like "offroad". |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Reepicheep
| Posted on Monday, June 09, 2008 - 02:54 pm: |
|
Ehhh.... bikes are for adventure. If this is the worst thing that happens to you in that pursuit, life is good. If it makes you feel any better about crunching a street bike in the dirt, you should see what terrible things I did to my dirt bike on the street ![: (](http://www.badweatherbikers.com/buell/clipart/sad.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ratbuell
| Posted on Monday, June 09, 2008 - 03:34 pm: |
|
Tipsy - in case you need it, the PN for your left bracket is N0526.1AKYBP, list price is $159. Not as bad as I expected... Unfortunately, nobody near you shows one in stock, but they aren't backordered either... ![: )](http://www.badweatherbikers.com/buell/clipart/happy.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cityxslicker
| Posted on Monday, June 09, 2008 - 05:36 pm: |
|
I would have loved to have had the 450 Buell dirt bike. Still upset they killed that program The Muell Blast project goes to mech this week for the timing chain and lighting upgrades, then the body work will begin. I WILL ride the hell of that off road. $100 Xr250 $150 Buell Blast takeoffs $400 Mech fees and lighting updates Riding a lighter meaner dirtier Muell dirt bike .... Priceless |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Chadhargis
| Posted on Monday, June 09, 2008 - 06:02 pm: |
|
$7000 for a dirtbike?? Here's my idea of a good dual sport bike: http://cgi.ebay.com/ebaymotors/Suzuki-DR-Z-DRZ-400 -2001-Suzuki-DR-Z-400-Great-Condition-Runs-Great-F ast_W0QQcmdZViewItemQQcategoryZ147905QQihZ006QQite mZ160246881669QQrdZ1QQsspagenameZWDVW |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Monday, June 09, 2008 - 06:13 pm: |
|
Thanks Rat...fortunately, I have the parts manual. Unfortunately, you are correct. I've made a few calls and this part is not in stock locally. I placed an order earlier today...hopefully it'll arrive in time for my planned Homecoming departure. Happy holes!
Maybe a piece that bends when the bike falls over instead of cracking would be better suited if you're going to call your product an "Adventure Bike?"
Tipsy |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Miamiuly
| Posted on Monday, June 09, 2008 - 11:36 pm: |
|
Hmmm a little JB weld.... sorry I couldn't help it. Billet replacement pieces should allow some bend or they'd need to be ti or metal. Chad- as for $7000 dirt bikes, it just kind of amazes me, but they are racers and actually $7400 or $7500 (There must be a color option.) http://www.yamaha-motor.com/sport/products/modelov erview/cat/2009/59/model_overview.aspx DRZ was on the list, ktm525exc was on the list and those are pricey, then I rode the uly and said fugg it. Also just picked up a used motox bike to jump and generally beat on and maybe even get on a track again. (Message edited by miamiuly on June 09, 2008) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bosh
| Posted on Tuesday, June 10, 2008 - 07:37 am: |
|
Wow, sounds like a pretty hard crash. I'm amazed at how durable these bikes are, being so heavy and all. But I'd rather have that piece break off than bend or break something in the main frame. It looks to me like it's designed to shear off for that reason. left bracket for $159 is dirt cheep.... well almost anyway. That part would be $600.00+ on a BMW. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Chadhargis
| Posted on Tuesday, June 10, 2008 - 12:15 pm: |
|
I've broken a couple of shifter brackets, and I was very happy they broke off versus cracking the engine case. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Tuesday, June 10, 2008 - 03:36 pm: |
|
I've broken a couple of shifter brackets, and I was very happy they broke off versus cracking the engine case. I think I'm missing your point Chad. The footpeg bracket is mounted to the frame. How would it crack the engine case if it were to bend? Tipsy |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Chadhargis
| Posted on Tuesday, June 10, 2008 - 06:47 pm: |
|
Mine isn't mounted to the frame. Mine is mounted to the primary cover. Look in the very first picture in this thread and you'll see it there. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bosh
| Posted on Tuesday, June 10, 2008 - 07:14 pm: |
|
I think I'm missing your point Chad. The footpeg bracket is mounted to the frame. How would it crack the engine case if it were to bend? Chad is talking about the shifter bracket not the foot pegs. Same principle applies. ![](http://www.badweatherbikers.com/buell/clipart/thumbsup3.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Johnboy777
| Posted on Tuesday, June 10, 2008 - 07:33 pm: |
|
Hey Tip, here's a good excuse to get Tuonno mirrors from American Sport Bike ... very well worth it.
![](http://img145.imageshack.us/img145/3719/bike4zz3.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Wednesday, June 11, 2008 - 03:38 am: |
|
Chad is talking about the shifter bracket not the foot pegs. Same principle applies. I see. Fortunately, the shifter came out unscathed. It was the footpeg bracket that separated. Glad I had some well prepared riding buddies to save the day! Tipsy |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Wednesday, June 11, 2008 - 03:41 am: |
|
Hey Tip, here's a good excuse to get Tuonno mirrors from American Sport Bike ... very well worth it. Johnboy, I must be in the minority...but not only do I like the look of the stock Lollipops, but I also have the best rear visibility through them vs. any other set of motorcycle mirrors I've ever had! Tipsy |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Froggy
| Posted on Wednesday, June 11, 2008 - 08:54 am: |
|
Tipsy, stop tipping it over! If you think the stock mirrors are the best mirrors ever, then obviously every other bike you ridden had none. I got a spare set of Tuono mirrors I pulled off my wreck Uly if you want to borrow them and see the light. Remember, I live about an hour north of you, so if you ever need help/parts/something, feel free to give me a buzz |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Miamiuly
| Posted on Wednesday, June 11, 2008 - 10:11 am: |
|
Old 900rrs have the best mirror set up I've experienced. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Chadhargis
| Posted on Wednesday, June 11, 2008 - 12:43 pm: |
|
Yes...I was talking about the shifter bracket. I am very glad someone decided it was a good idea to make these parts out of brittle metal so they snap off and don't damage really expensive parts. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tipsymcstagger
| Posted on Wednesday, June 11, 2008 - 01:06 pm: |
|
Tipsy, stop tipping it over! If you think the stock mirrors are the best mirrors ever, then obviously every other bike you ridden had none. I got a spare set of Tuono mirrors I pulled off my wreck Uly if you want to borrow them and see the light. : ) Remember, I live about an hour north of you, so if you ever need help/parts/something, feel free to give me a buzz I know! I hope this doesn't become habit Last night, someone told me they once read "Break, repair, ride, repeat" (or something very similar). And thanks for the help offer Froggy! Likewise if you're in NYC...though I don't keep much in the way of tools here Yes...I was talking about the shifter bracket. I'm with ya now Chad. I still think the foot peg bracket could be designed with some "give" without potential for damage to other parts of the bike though. Anyone here carry a spare shift and/or rear brake lever? Tipsy |
|