G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Buell82 Posted on Sunday, May 18, 2008 - 11:27 pm:        I am looking to purchase a seal driver from Motion Pro to rebuild my front forks on my '97 S3. What size do I need? I think it is 41mm. Also are there any other tools that I absolutely need? Thanks, Mike   Werewulf Posted on Sunday, May 18, 2008 - 11:37 pm:        http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=3842&post=802080#POST802080   Yo_barry Posted on Monday, May 19, 2008 - 07:29 pm:        I used the Motion Pro tool on my 2001 S3T. It's a 41mm for the 2001. (Note: I also used it on my Sportster, 39mm and it worked fine.) I had a spring compressor borrowed from BC Steve that was helpful in releasing the retainer, but might have been able to do it without this. The other tool that you need is also available from Motion Pro and is used to set the fluid level in the forks. It's a syringe attached to a metal tube. You adjust a stop on the metal tube to the correct level, stick the tube into the fork leg and suck the extra fluid out.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: