| Author | Message | ||
     Nevrenuf |
went to a dyno shoot out last weekend to have a couple of the bikes checked to see where they stood and the m2 pulled a 92.7 and the blast did a 28.8. looking for some comparison. | ||
| Bads1 |
Whats been done to the M2 ?? | ||
| Oldog |
best pull peak on the X1 with stock ECM 87 engine was totally stock other wise, mods super trap and force winder. | ||
| Cobradave93 |
Had my 1125R done at a dyno shootout about a month ago. 139.9 hp | ||
| Rick_a |
Before my crank went all cattywompus last year my S1 was putting out 96 hp and 82 ft-lbs. Soon I'll have her on the dyno again with much more invested. | ||
| Paint_shaker |
86hp/ 76 ftlbs for the 98 S1W stock motor with Minkuni carb, forcewinder and V&H exhaust. 84hp/ 69ftlbs for the 08 XB12R stock motor/ecm with a spec ops pipe.* * About this run. The torque curve was about as flat as you can get across the RPM range. The being said, I was not happy with this run. The HD monkey rolled on the throttle right around 2000 RPM, causing the motor to lug pretty hard. And he let off 7000 rpm. | ||
| Nevrenuf |
sorry about the delay bads1, was down at mrytle beach this weekend. not really sure without looking at the paperwork but there has been some head work along with the pistons, cams, mikuni carb and a supertrapp with 21 discs and open end race cap. as soon as find the paperwork i'll post it. | ||
| Bads1 |
I thought something was done. No way is a stock M2 gonna pull them numbers.... Cool!!! | ||
| Nevrenuf |
yea, you can ask djkaplan about how the motor pulls. and so far it's holding up pretty good. (knock on wood) | ||
| Paulxb12r |
85.38 at a HD shoot out | ||
| Limitedx1 |
90.3hp 81.9 ftlb 2000 x1 force pipe race ecm carbon race air cleaner next summer i want 100 to the wheel and i will quit messin with it, so this winter i may drop the motor, hmm while im in there...... | ||
| Nevrenuf |
i guess i have to be pretty happy with what i got not that i'm not happy with what i got. ron, what part of pittsburgh are you from, grew up in sylvania heights(outside of clairton). got one brother who lives out around rostraver somewhere and another one that's going back to work in the area. he's wondering who's a good dealer in the area cause he thining about getting a new ultraclassic. any imput would be appreciated. | ||
| Paint_shaker |
My numbers provide excellent feel when I twist the go stick!! Plus, the mainly stock config allows for mainly stock reliability and ridability. | ||
| Nevrenuf |
the bike wasn't stock when i picked it up a year and a half ago so i really didn't want to convert it back to stock after the motor took a crap. hopefully it will last a little longer this time. |
