Author |
Message |
Onahog
| Posted on Friday, May 02, 2008 - 02:06 am: |
|
Hey...Anyone able to supply me with a good picture of a 1990 RS1200 rear chain guard... I just scored a bike and its missing, So, I need to do what the Buell Guros did to a sporty one or try to find a factory one thats good ta go.. Any help would be kewl...Thx..hankb |
Loki
| Posted on Friday, May 02, 2008 - 02:21 am: |
|
part # should be..... G0550.4QQ |
Rich
| Posted on Friday, May 02, 2008 - 06:42 am: |
|
|
Rich
| Posted on Friday, May 02, 2008 - 06:44 am: |
|
|
Loki
| Posted on Friday, May 02, 2008 - 09:29 am: |
|
I spy, something with a weave pattern. I take it that is the new rear sprocket? I like the look of the larger holes in it. Takes some of the largeness out of it. |
Onahog
| Posted on Friday, May 02, 2008 - 09:33 am: |
|
THX guys...I will try source a factory one before I resort to fabrication...Hb |
Court
| Posted on Friday, May 02, 2008 - 11:49 am: |
|
I suspect I know where to find one. Looking now. I'll find out how many are in stock and how much. |
Court
| Posted on Friday, May 02, 2008 - 11:51 am: |
|
By the way . . . you need to check with Dave Gess and see if the chain guard on the photo bike was off because the bike wasn't done or if he took it off for photo reasons. Little secret as to why the Buell front single rotor is placed on the right side. |
|