| Author | Message | ||
     Tasmaniac |
G'day All Does anyone know where to purchase this Ohlins Damper that is rumoured to be available for the 1125? Regards Brett | ||
| Nickcaro |
 | ||
| Rainman1ne |
their site does not show one to be available | ||
| Anonymous |
Tas From Buell Race Support, via your dealer. | ||
| Fresnobuell |
What about the GP shifter kit? Same place? | ||
| Anonymous |
Yes | ||
| Dano_12s |
Thanks Anon.dealer has put me on the list. Now get back to work and make those brackets! | ||
| Tasmaniac |
Has anyone purchased a steering damper for the 1125 from Buell race support yet? if so how much was it in USD? | ||
| Dano_12s |
They are waiting for the brackets to arrive. Mid May I was told.Should be about $420. | ||
| Xb9 |
I just modified the steering damper from my XB9R for the 1125R. It is a Woodcraft-CFM that was offered in the early XB days but I don't see them advertised anymore. It's the one that mounts just above and in front of the lower triple clamp - has a bracket that attachs to the frame where the fairing/gauge stay is attached. I had to remove the knob on the end of the damper and shorten the rod some so it woudn't hit the inside of the pods. Also had to cut off a bit of the fork leg clamp where the damper mounts to it and open it up on the lathe 1mm to fit the larger fork leg dia. Works and looks great and it's tucked in clean if you're not looking for it you wouldn't know it's there. I'm sure they still would have the CNC programs for the brackets, call them and you may be able to special order? I think Woodcraft was making some of the brackets for Buell like the rearsets on the XBRR. | ||
| Arillius13 |
So do you need a race license to buy this steering damper then? How about that lower fairing i see on the 1125r race bike? is that available through buell race support as well? | ||
| Fresnobuell |
Ouch. $420. Is that true that you need a race license to buy from Buell Race Support? |
