| Author | Message | ||
     Scott_in_nh |
Has anybody done this? I want to be able to data log both cylinders for tuning with ECMSPY. Does it need to be in basically the same location as the rear pipe and on an angle and such? | ||
| Jos51700 |
Dynos use a pump with a sniffer tube that can be (Depending on the muffler) shoved up the butt, so to speak, and snaked around either pipe. This sniffer leads to the O2 sensor the dyno uses. Travelling to, and looking at any '07 and later HD should be a good example on where to locate it. Any muffler shop will have the bung, and a plug for it when you're done tuning, if you only want to buy one wideband sensor, and swap/remove it when you're done. | ||
| Scott_in_nh |
I am permanently welding the bung on. It will be plugged when not in use. I will not be using a dyno, I will be data logging while riding the bike..... | ||
| Buford |
Any updates on the dual sensor/cyl project? |
