Author |
Message |
Onahog
| Posted on Monday, February 18, 2008 - 11:09 pm: |
|
3- 6 pin front rotors.The Lightest ones made! Good used ! No back and forth play in carriers Have some side play which wave washers would fix...# BW856.9 @ $2.05 each 2- complete..$75.00 ea 1- No pins....$50.00 Onahog hankb@mts.net
|
Phelan
| Posted on Tuesday, February 19, 2008 - 03:01 am: |
|
I'll take one of the ones with pins. I've been looking for one for my S2 front end on my 1200S. Do you have Paypal? If so my paypal address is phelan_z06@hotmail.com . Send me an invoice. |
Beachbuell
| Posted on Tuesday, February 19, 2008 - 05:43 am: |
|
Please hold one complete for me. I'll get back with you later today and let you know if I need it. Thanx! |
Beachbuell
| Posted on Tuesday, February 19, 2008 - 02:18 pm: |
|
Passing it on, Thanks anyway. |
Onahog
| Posted on Tuesday, February 19, 2008 - 04:57 pm: |
|
1 rotor with pins sold to PHELAN.Hb |
Billetmetallic
| Posted on Tuesday, February 19, 2008 - 08:29 pm: |
|
yo hb, dibs on the other complete rotor, you say no rotational play on the carrier, is that tested while mounted on a bike? do you know the mileage on the one I would be purchasing? thanks, in advance, for your time! -g |
Onahog
| Posted on Tuesday, February 19, 2008 - 09:49 pm: |
|
Billet...Mileage unknown and not bike but hand tested..They have had the E clips updated to the bolt/nut pins... I got these from a dealer whose is closing out...They appear to have very low useage as the rotors are very clean..no scoring at all.... I need your complete adress etc to get total with shipping...PM @ hankb@mts.net I am going to the posty tommorow, so if you get this, reply tonight and confirm the purchase....Ok...Thx..hankb. |
Billetmetallic
| Posted on Wednesday, February 20, 2008 - 12:07 am: |
|
info sent hb |
Ratbuell
| Posted on Wednesday, February 20, 2008 - 01:17 am: |
|
Can you put a pin set in the no-pin one to see if it has any rotational wear? I've got new pins in mine, but worn pinholes... We need to sync up our timing a bit better, so we can stop transferring the same couple bux back and forth thru paypal, LOL. |
Onahog
| Posted on Wednesday, February 20, 2008 - 08:59 am: |
|
2 rotors with pins Sold pending payment. Rat... This one with no pins seems to have had very little use as well... I run my finger in the carrier hole and cant feel or see any wear...Just some brake dust....The rotor is different from the other 2 in the fact that is says "ST-1" stamped in it and only has 6 cutouts...I will take a close up photo for ya...Ok... Payapl likes us Bro....LOl.....Hb |
Onahog
| Posted on Wednesday, February 20, 2008 - 09:07 am: |
|
ST-1
|
Ratbuell
| Posted on Wednesday, February 20, 2008 - 10:32 am: |
|
Interesting, never seen that stamp before. Court? If you think it's OK and just needs pins, I'll take it. As you know I just rebuilt the one on my S2 with new pins, but the rotational wear was too bad. These things, I like to have spares. And since I am picking up my bare S2 frame this weekend...eventually I'll need a third brake. Paypal doesn't like me. I never withdraw the money so they never get a fee from me - I just send it bouncing around the globe ;) Besides, she never sees the paypal account so it's my "play" money. |
|