| Author | Message | ||
     Loki |
Would anyone happen to have...... a cad file drawing of the right half of the engine case? Showing the case outline and the various bolt hole locations. much thanks will be tossed in your direction. | ||
| Slaughter |
Anything you can't get from the gasket itself? | ||
| Loki |
Probably if I had one handy. Working on a couple custom parts for my RS. Would be nice to layer the three required drawings(auto-cad) to check alignments and positioning. For that matter all I really need is the bolt pattern and dimensioning(centers). | ||
| Nevrenuf |
i'm not sure exactly when but i think someone did a 3d drawing of an xb. check the archives then you can check with that person to see if they have anything. worth a try anyhow. | ||
| Ft_bstrd |
I thought we were starting a different cad file. Here's my entry:  What kind of an a$$hat do you have to be to hit a bellboy with a phone? Danger_dave should kick his ass and permanently revoke his Aussie citizenship. | ||
| Danger_dave |
He's a Kiwi. >>Early life Crowe was born in Wellington, New Zealand, the son of Jocelyn Yvonne (née Wemyss) and John Alexander Crowe,[2] both of whom were movie set caterers<< (Message edited by danger_dave on January 05, 2008) | ||
| Loki |
by the way the info I seek is for the tube frame generation |
