Author |
Message |
Cyclonemduece
| Posted on Sunday, December 09, 2007 - 01:07 am: |
|
i have an 2000 M2 with a manta tank and X1 inverted forks i think that i want to go with crossroads bars and i need to know if i need a set for an M2 or an S1/X1 part number, i will be getting them from American Sport Bike by the way. |
Ratbuell
| Posted on Sunday, December 09, 2007 - 12:08 pm: |
|
Email Al at American Sport Bike, he'll get you the right ones. |
Devdawg
| Posted on Friday, December 14, 2007 - 12:24 pm: |
|
The tank is the deciding factor. You'll need the bars for a 2000 M2. I have a similar setup. |
Cyclonemduece
| Posted on Sunday, December 16, 2007 - 06:29 am: |
|
i ordered em from asb thy are parts from two kits |
Crashbuell
| Posted on Wednesday, December 19, 2007 - 12:08 pm: |
|
How about clubman bars? Has anyone put clubman style bars on a bike with the manta tank? I put a set of X1 bars on my cyclone and suddenly everything is a little snug. The controls and the mirror mounts are crowding my grips off the ends of my bars and also interfering with my flyscreen. I've seen people notch their flyscreen so that it will fit with the brake reservoir, but I don't want to go that route. Anyone have any suggestions? |
Djkaplan
| Posted on Wednesday, December 19, 2007 - 02:11 pm: |
|
That's odd... I think X1 and M2 bars are the same. |
Oldog
| Posted on Wednesday, December 19, 2007 - 11:38 pm: |
|
That's odd... I think X1 and M2 bars are the same. The Cyclone bars IIRC ( I changed a set for a ridding buddy } had different bend at the bottom ( dif in the trees etc..) to miss the tank again going by memory, YMMV} |
|