| Author | Message | ||
     Northernyankee |
Quick question, I am sitting here at work and I was going to solder up my cable now that I have all the parts. I know which connector to use but I am not sure whether to use the male or female pins. Anybody have their bike around to take a look? Mine is at home since it was snowing this morning. Thanks guys. | ||
| Treadmarks |
The bike has a female plug housing, with male pins. So you would install the female pins on your cable. | ||
| Northernyankee |
Thanks man, I really appreciate it. Now I can right to tuning tonight instead of spending time making the cable at home. | ||
| Jmor03 |
 Pinout !-Orange Tx 2-Black Gnd 3-Yellow Rx 4-n/c (not connected) | ||
| Mesafirebolt |
What connectors are you using? do you have the TTL -232R on it some where? | ||
| Northernyankee |
I am using the same cable and connector jmor showed in his pic | ||
| Mesafirebolt |
Jmor03, may I ask where you got the cable??? And what it consists of? I cant find crap here locally and would like to make sure I order the right stuff | ||
| Thesmaz |
Count me in on the request for info about making he connector. Thanks! | ||
| Jmor03 |
TTL232R USB to TTL Serial Converter Cable came from Mouser Electronics Part # 626-dlp-ttl232r Cable http://www.mouser.com/index.cfm?handler=home 4 pin Deutsch Connector purchased from E-Bay | ||
| Northernyankee |
Mouser is out of stock on those...I ordered 626-DLP-TTL-232R-WE Which is the same thing but has wire ends so you don't have to cut off the connector. | ||
| Mesafirebolt |
Whats the Deutsch P/N? does it connect to the grey ECM connection or the square data port connection? Also are you using a laptop with this? Does it have any effect on the data not having a 5v converter? | ||
| Jmor03 |
# DT06-4S-C015 Connector Buell UK Forum ECMSPY FAQs http://www.bike-pix.com/forum/viewtopic.php?t=2034 0&sid=e4927057f5eaee439455bffc2bdb542a | ||
| Mesafirebolt |
Ok, now-plug into the 4 pin data plug right-not the ECM itself? | ||
| Kedo |
Jmor03- I ordered the same part as Northernyankee - back-ordered until January 13th.  Does this connect to a standard usb cable? Can you give me more specific info how and with what you made your cable? Thanks.  | ||
| Mesafirebolt |
I ordered mine from mouser, they had like 30 cables in stock and the Plug came from Batts racing, standard 4 pin deutsch plug. got it ALL in 3 days and spent 3 hours last night playing with the set up, ITS THE BOMB!!!! TPS Reset in about 3 minutes... (Less than 40 bucks including shipping for the assembley) (Message edited by mesafirebolt on December 14, 2007) | ||
| Kedo |
Mesafirebolt - What is the part number? I'll call and change my order right now. Thanks. | ||
| Kedo |
Mesa - I just called Mouser and they're out of stock. I ordered the assembly that you're referring to. I'll have it somewhere near mid-January. I'll have more questions later. Thanks.  | ||
| Northernyankee |
626-DLP-TTL-232R-WE Thats actually the one I ordered...it is the same thing but has wire ends instead of the connector...but you cut that connector off anyways. The have 76 of them in stock right now. | ||
| Thirty2vsvt |
I did a yahoo search and found some outfit that sold the cable. The plug came from batts racing. 3 days for shipping, 20 minutes for assembly and i have a working cable. Now if I could just change this cold Ohio weather... | ||
| Mesafirebolt |
I tell Ya, I'm a TPS Resetting FOOL!!! This thing is the BOMB! Anybody in PHX need a reset??? LOL I did some playing around with the fuel maps on my stock ECM, I was able to get rid of most of the Decel Popping and get it to Idle so smooth its UN Buell like! | ||
| Kedo |
Mesafirebolt & Jmor03 - after three months, I received my cable from Mouser. It looks identical to the one in the picture in Jmore03's post except the end that's connected to the usb wire is the piece that's not connected in the picture. (get it?). So, do i need to order the other end and re-splice? Wassup? Do I need the tool to pull and push the pins? This isn't such an easy start. (Message edited by kedo on February 24, 2008) | ||
| Mesafirebolt |
Yeah, you need the DT06-4S-C015 Connector. You can find it at Batts Racing, its the 4 pin connector, about 10 bucks if I remember... | ||
| Kedo |
Mesafirebolt - thanks. what do i do after i get it? how do i change the end/splice the connector. i'm not the computer-geek-wire-pin-splicing hound. should i hire one? LOL | ||
| Kedo |
Mesa - went to the Batts Racing/Deutsch Connector site. Found the part. Do i want nickel or gold sockets? stamped or solid? 14-16 or 16-18 AWG? YIKES! |
