| Author | Message | ||
     Okinawaxb12s |
could not find a definitive answer and i don't have the manual yet[dave is working on that]so here goes.if i remove the snorkel and install the race filter,will i have to do a tps reset or anything else.thanks. | ||
| Barkandbite |
No, you will not have to reset the TPS by removing the snorkel and installing the race filter. Nor will you if you install the race exhaust. Only if you replace the computer or the TPS itself. Chris | ||
| Okinawaxb12s |
thank you.that is what i needed to hear.now how do i get the airbox off. | ||
| Barkandbite |
 1) Take the seat off (least you have to do this with an R -- dunno about the S) 2) Remove the two T27 fasteners in the rear of outer airbox 3) Remove the two T27 fasteners in the front of outer airbox. 4) pull up on the four latching pressure clips (two front, two back) which hold the inner airbox cover down to the base. 4) This will expose the air filter. 5) Vacuum all the crap outa there 6) Install the new air filter 7) Reinstall (inner, outer & seat) (You'll need to just unhook the fuel vent line as it trapses over the inner airbox cover.) Rinse. Lather. Repeat. Glad to hear your manual is on the way  Good luck. Chris | ||
| Briz31 |
Here here, that is one heck of a description. But YES it's true.. Easy stuff.... |
