| Author | Message | ||
     Skrip |
Hey guys. I have an EBR 1190 ignition that I'm trying to fit into my '08 1125R (due to breakage)but the wire colors and connector are different. Still the same number of wires (4) coming out of both and the wiring schematic on EBR's website is, for all intense and purposes, the same as my '08 but it doesn't show the colors of the wires coming from the ignition switch itself. So I suspect it would work I just need the right wires going to the old connector. Does anyone know what wires are hot going into the EBR ignition. On the old ignition I have two reds that are the hot leads. But on the EBR I have no reds leads. Only a green/black, green, orange and a yellow. Can someone please tell me what the two hot leads are? Already spoke with an EBR tech and they have no idea that there's even been a color change. Any help would be greatly appreciated! (also posting this on the EBR forum)   | ||
| 1313 |
"Buell Motorcycles" has an 1190 wiring schematic posted online. The link below should get you close enough: https://www.buellmotorcycle.com/techtalk Hope this helps! | ||
| Skrip |
Thanks, but no. I've already seen this. It doesn't show the colors of the ignition harness itself. Just the wires coming from the harness which are the same as the 1125R. What I really need is someone with an 1190 that can locate this connection and visually see what wires match up from the ignition switch to the wires it attaches to in the harness. Either that or someone with multi-meter to probe the wires and see which ones have voltage in the off position. Should be 2. There's a beer in it for you if ever in the Tucson area.  | ||
| Skrip |
Forgot the pic of EBR's vague schematic. Basically I need the wire coloring left of the 1 thru 4 numbers.  |
