| Author | Message | ||
     Spiess |
I have a set of late PM wheels(non-split spoke) that I have had for a few years in the garage for my 2000 M2. Are they direct bolt on or are there specific spacers that I am missing? Can I use the spacers from my stock wheels? Also looking for what replacement wheel bearings I will need? Thanks any help is appreciated  (Message edited by spiess on December 19, 2021) | ||
| Spiess |
Nothing  | ||
| Victory |
You want the VXB 6205 2RS for the rear PM Wheel QTY 3 . VXB brand bearings are great. Cast alloy Wheels - NSK bearings Front wheel - 6204-2RS (47 OD, 20 ID, 14 W) Rear wheel Right side - 6205-2RS (52 OD, 25 ID, 15 W) Left side - 62205-2RS (52 OD, 25 ID, 18 W) PM (Chrome) Wheels - NSK bearings Front wheel - 6204-2RS (47 OD, 20 ID, 14 W) Rear Wheel - 6205-2RS (52 OD, 25 ID, 15 W) XB Wheels - FAG bearings (IIRC) Front wheel 6005.2RSR (47 OD, 25 ID, 12 W) Rear wheel 6006.2RSR (55 OD, 30 ID, 13 W) On a side note, you can use the part numbers and go to your local BEARING SUPPLY STORE and find brand alternatives if you desire, but remember, not all bearings are created equally. Also make sure to use the proper torque specs tightening down your axles so that you don't overtighten them and damage the bearings. I suspect you will need all the PM Spacers for the wheels to work. The swing arm is the same but the front legs are different...the trees look the same. (Message edited by victory on January 26, 2022) |
