Author |
Message |
Mike_lee
| Posted on Friday, January 08, 2021 - 04:15 pm: |
|
Heya.. been a min since ive been here. Hope everyone is still alive and kickin, and that 2021 is better for all. I aquired my sons 99 m2, she was very neglected. I invested a bunch of time in it and shes much better now but, all my friends are short(ter). Anyone know if such an item still exists? It did have one when the shock recall was completed but.... |
Mtjm2
| Posted on Saturday, January 09, 2021 - 05:52 pm: |
|
Your friends are shorter ? You mean lower ? They made the M2 and M2L I think starting in 00 |
Mike_lee
| Posted on Saturday, January 09, 2021 - 08:11 pm: |
|
Let me rephrase, my friends are more vertically challenged than myself. I know theres a little attachment that attaches to the rearmost of the shock that lowers the rear. I dont know if it was custom or not. Just lookin to see if theres any insight. |
Midknyte
| Posted on Saturday, January 09, 2021 - 10:09 pm: |
|
Very hard to find item. I found it much easier to find / buy an M2Low shock and kickstand. Remember to raise your forks in the tree by a like amount... |
Mike_lee
| Posted on Sunday, January 10, 2021 - 12:22 pm: |
|
Was the stock m2 shock the 16"? Dont recall. And were those the only differences between the m2 and the low? Shock and stand? |
Mtjm2
| Posted on Sunday, January 10, 2021 - 12:50 pm: |
|
My M2L is 16” shock Front forks are also a bit shorter so they don’t stick up much past the top triple tree and the side stand |
Mtjm2
| Posted on Sunday, January 10, 2021 - 01:04 pm: |
|
Mike , you want to trade parts ? Pm me |
Victory
| Posted on Sunday, January 10, 2021 - 01:19 pm: |
|
The Lowering bracket on ebay is a Mystery. |
89rs1200
| Posted on Sunday, January 10, 2021 - 04:32 pm: |
|
Have a collar made for the shock. 1" thick equals about 2" lowering. The collar effectively lengthens the shock and maintains preload. Then raise the front fork tubes in the tipple tree. This lowers the front and just about maintains the rake. http://www.badweatherbikers.com/buell/messages/476 23/198825.html Can't go any lower than 2" or the rear tire will hit the underside of the seat and oil tank. Cannot use the 14.5" shock mount and a 16" shock. That lowers the bike so much that the rear fender will be about 2" from the underside of the seat. BUT! Works great if you are building a trike! See my profile photo. Lowering the rear increases the rake which is exactly what a trike needs. |
Mike_lee
| Posted on Sunday, January 10, 2021 - 04:54 pm: |
|
interesting... Thanks for the info all |
Mtjm2
| Posted on Monday, January 11, 2021 - 05:23 pm: |
|
Replied to your pm Mike May have ended up in your spam |