G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Bl76 Posted on Monday, August 31, 2020 - 01:39 pm:        Have an 09 1125r with clutch issues, among other things. Turns this port was never completely drilled through to the cylinder. Does anyone know the diameter of opening so I can finish it?   Shoggin Posted on Monday, August 31, 2020 - 03:20 pm:        It's just full of hard deposits. Use a welder tip cleaner to knock the stuff out or sometimes a jewelers drill if the deposits are too hard. The size isn't that specific, so start small. it's only meant to equalize the fluid pressure when the system is in neutral.   Bl76 Posted on Tuesday, September 01, 2020 - 02:32 pm:        Oh ok, I'll give that a shot. Thank you   Bl76 Posted on Sunday, September 06, 2020 - 07:16 pm:        Couldn't get anything out so I went ahead and drilled it with a 1/16 bit. Definitely wasn't a hole there before so not sure how the previous owner rode this thing. Clutch is now working great.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: