Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Coastrambler
| Posted on Tuesday, July 07, 2015 - 07:37 pm: |
|
OK, I'm going wade into it one more time. I believe what is causing the stator to fail is the voltage regulator. We, '09 1125 people, have a high stator failure rate due to the VR being a shunt type. This causes the alternator (stator/rotor) to be tasked with full output capability at all times. Thus causing the stator to heat up till it eventually fails. This is not unique to our machines, Ducatis among others suffer this too. Added cooling of the stator, ie EBR modified rotor helps. The system is marginal to begin with so any added cooling is good. Marginal in that it, the alternator, is close to being OK. I had a stock setup go 18,000 miles before failing. The best fix is a series VR. This draws only the power needed from the alternator. Thus the stator runs cooler. Added benefit is it's cheaper and easier to implement. I've 8,000+ miles on my series VR, stock rotor. VR runs barely warm to the touch. And that HD "fix" should definitely be tossed. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Classic_physique
| Posted on Thursday, July 09, 2015 - 09:27 pm: |
|
What type are you using model, manufacturer? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Coastrambler
| Posted on Friday, July 10, 2015 - 02:51 am: |
|
Compu-Fire 55402, I forget where I got it. I also added a voltage monitor from the J&P catalog. Velcroed it to the fairing brace. It's comforting to see the 2 green bars. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Squish
| Posted on Tuesday, August 04, 2015 - 09:41 pm: |
|
What is causing the stator to fail is stator material breakdown from too high of a heat load. The stator materials cannot tolerate the excessive heat load (i.e., burns-up) and quickly fails. This could also be termed "poor design". The choices to correct the poor design are: 1. Build a stator that can tolerate extremely high temperatures, or 2. Lower the temperature of the stator to a level the stator materials can reliably tolerate. Solution #1, if it is possible, would be extremely expensive (like, say, a NASA project). Solution #2 is more cost-effective. To lower the stator temp, there are a couple of paths - as you mention, a series Voltage Regulator. Or the modified rotor with the oil-cooling jet. Or if your if you’re like me, paranoid, you can do both. I guess I am not that worried about it though….have almost 8,000 miles on the stock system with my 2009 model. I keep the oil-level topped all the way up. See you down in Cruz sometime. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Figorvonbuellingham
| Posted on Tuesday, August 04, 2015 - 10:17 pm: |
|
Over on the AF 1 Aprilia Caponord ETV 1000 forum, the first thing they recommend to new owners of these old machines is to replace the voltage regulator with a mosfet type. There are a few stories of stator failure but nothing like ours. The caponords have chronic coil failures amongst other things. I found it interesting that they replace the rec/regs as their engines are Rotax vtwins as well. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Footstuck
| Posted on Saturday, October 31, 2015 - 01:55 pm: |
|
Hi did you post up a thread for installing your Compu-Fire 55402 I'm belt and braces also, but so far: EBR Rotor and twinmotorcycles stator with HD loom removed Would be interested in the location / additional wiring ect Regards FS |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Coastrambler
| Posted on Wednesday, December 08, 2021 - 12:49 am: |
|
Just finished replacing VR, with another Compufire 55402. First one lasted 20,000 miles. Not all that long as such items go. Stator is good. Possibly when series rectifier/regulators fail they just go open. Will take it out on a 50 mile check run tomorrow. Only thing I saw was 2 butt splices that had gotten hot enough to turn black. Not a good thing. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ebmachine
| Posted on Tuesday, December 14, 2021 - 07:17 pm: |
|
I have had no problems with SH847 series voltage regulator. A series VR keeps the stator cool. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Coastrambler
| Posted on Wednesday, December 15, 2021 - 01:03 am: |
|
Hey EB, Series VR is indeed good for the stator. Was just theorizing as to failure state of my VR. Threw it away without checking. The Conpufire is a series device. It gets barely above ambient temp in use. Too cold to ride around here right now. |
|