| Author | Message | ||
     Tjanusz3wirrcom |
What do you guys use for the rubber seal that goes from the top of the fuel pump brass barb into the aluminum housing. Looks like a 3/4 inch piece of hose. | ||
| Victory |
Saint Paul has them in their fuel pump repair kit. Otherwise those seals are not available anymore | ||
| Thunderlust |
Buell originally had to source the seals from an outside source. So can we as owners. Get the specs on the seal and look online for an industrial supplier/manufacturer. You may have to buy more than you need but they are available. I found a hardware store in San Diego that was the size of a Home Depot. So far I've been able to find washers, seals, etc. that fit my bikes perfectly. | ||
| Victory |
You can find the parts info on this forum. One you can get at Oriley and is basically a AC Metal and rubber washer seal. The other 2 orings are the obsolete bitch that will g=have to be matched up. On this forum years ago I found info for an Orileys part number. cant find it again. | ||
| Victory |
The oooo9 number is at Twin Cycles and somehow it crossed to a Orileys Part # but I cant find that anywhere! https://i.imgur.com/Mj2Ayia.jpg https://imgur.com/lgIMTuQ (Message edited by victory on November 24, 2020) |
