| Author | Message | ||
     Duanelr |
Torx T-30. I have 5 different versions of a T-30 tool. This one is new and by far my favorite. It has made life much easier. It fits in the hand well and get's a good positive bite on the screw-head, even when using it at odd angles. Love it. https://www.mcmaster.com/37455A27 (Message edited by duanelr on August 14, 2019) | ||
| Fresnobuell |
Can you show us a closeup pic of the end of your new favorite tool? The mcmaster site has a stock pic that's not the greatest. THanks. | ||
| Terrys1980 |
 https://www.kctoolco.com/wera-027958-t30-x-115mm-kraftform-plus-ball-end-torx-screwdriver/?_vsrefdom=adwords&gclid=Cj0KCQjw4s7qBRCzARIsAImcAxYZrOEW4XBbfMl-Vnl-cp1bPPd4PElIXWlsCpUvGf_XDusDkWLQCEkaAqvZEALw_wcB | ||
| Fresnobuell |
So this tool doesn't wear out the fastner head versus a traditional t30? | ||
| Duanelr |
Thanks Terry  Doesn't seem to wear them out, at all. It fits just as snug as my more expensive Craftsman. | ||
| 1_mike |
Bondus is one of the best names in this type of tool. Mike | ||
| Panshovevo |
Thanks. Gonna get one of those. Or maybe two! | ||
| Rudolfs001 |
Am I going crazy? There are three different tools in this thread. Duanelr has an unbranded tool from McMaster Carr. Terrys1980's picture is Bondhus, and the link is Wera.  | ||
| Tq_freak |
Rudols001 - Most Likely the McMaster tool is a Bondhus one McMaster has a habit of debranding all pictures of tools and other things they sell so you cant google the manufactures part number and get it cheaper else where. McMaster is awesome if you need it tomorrow. for work if I order by 4:30pm i have it at 10 am the next day with no shipping upcharge. But they are certainly not the cheapest. Mcmaster wanted 50 bucks a pop for some wheelbearings I needed. I found them else where for 7 bucks a pop. Like Amazon - they get you with convenience |
