G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sprintex Posted on Wednesday, October 17, 2018 - 05:13 pm:        I'm got everything back together after replacing the stator so now I'm trying to adjust the clutch and of course things are not going as they should. I'm turning the adjustment screw on the clutch counter clockwise but I'm getting no resistance, it just keeps turning, so what did I mess up putting the clutch assembly back on ??? It seems simple enough,compared to a Guzzi clutch. Thanks   Steveford Posted on Wednesday, October 17, 2018 - 07:13 pm:        Turn adjusting screw counter clockwise until it lightly bottoms, back out 1/4 turn, snap lever 3X and then adjust actual cable. Sounds like you're turning the screw the wrong way.   Sprintex Posted on Wednesday, October 17, 2018 - 08:58 pm:        Never mind, I missed the nut that goes over the adjustment screw. It's good to talk these things out.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: