Author |
Message |
Buellster17
| Posted on Friday, June 15, 2018 - 02:05 am: |
|
My 2009 1125R won't build oil pressure after oil change. I used the hiflo 564 filter, 3.0 quarts Mobil 1 vtwin oil, drained from left to right, new crush washers... By the book. I have run the bike for a few minutes and the oil light stays on, loud mechanical chatter, something is not right. I even tried rocking the bike forward and back, left and right, no change. This is my second 1125R to make this sounds and I'm worked my engine is about to seize. Please Help. |
Blower1
| Posted on Friday, June 15, 2018 - 05:39 am: |
|
Did you put the oil filter in on right way? |
Buellster17
| Posted on Friday, June 15, 2018 - 09:06 am: |
|
Yes, only one way to install the filter. |
Oldog
| Posted on Friday, June 15, 2018 - 02:04 pm: |
|
PLEASE POST INFO ON THE OIL FILTER |
Willmrx
| Posted on Friday, June 15, 2018 - 11:04 pm: |
|
Check the oil screen and see if there is anything in it. If there is,it might give you a clue of what might be going on. |
Buellster17
| Posted on Saturday, June 16, 2018 - 12:12 am: |
|
Much to my dismay, the filter was backwards. The Arizona heat got to my head. Thank you all for helping another rider out. |
|