Author |
Message |
Milar
| Posted on Wednesday, June 07, 2017 - 12:20 pm: |
|
My lights all work except the turn signals. I assume it is a failed flasher. Is there a ready replacement or need I order one? Attached is a pic. Mike
|
Upthemaiden
| Posted on Wednesday, June 07, 2017 - 12:32 pm: |
|
I'm almost positive the one on my bike came from pepboys. It's the some one I had on my xb9s, I pulled it when I was putting that bike back to original before I sold it, found it in a box after I picked up the S1. |
651lance
| Posted on Wednesday, June 07, 2017 - 12:47 pm: |
|
This is what your looking for. https://www.sphdonline.com/products/y0621-md-new-g enuine-buell-turn-signal-flasher-fit-most-xb-p3-mo dels-b4s |
Milar
| Posted on Thursday, June 08, 2017 - 04:08 pm: |
|
You've got cash Lance. I used PayPal. Mike |
Milar
| Posted on Tuesday, June 13, 2017 - 11:48 am: |
|
Ready to install the new flasher. But lost my wiring diagram showing which wires go to which spades. My shop manual doesn't say either. I've got a black ground wire, a red wire and a purple wire. Which spade takes the ground wire? As I recall it is one of the 2 parallel spaces. But I'm not certain. Attached is a pic. Thanks, Mike
|
2003xb9r
| Posted on Wednesday, June 14, 2017 - 01:52 am: |
|
Looking at your photo, ground (black) goes on the left terminal, purple in the middle and it must be red on the right although on mine it's orange with a white stripe) |
Milar
| Posted on Wednesday, June 14, 2017 - 11:30 am: |
|
Thanx 2003XB9R! It worked perfectly. Mike |
|