| Author | Message | ||
     Mastuhfox |
I heard that a Ford Mustang could be used. Anybody have any experience with this? | ||
| Midknyte |
I had to get a new one last fall. Dunno where it came from but my shop was able to find one... I would not assume outright that you couldn't get one. | ||
| Hootowl |
St paul hd has them. Walbro makes the pump, if you just need the pump, and not the regulator... http://www.fuel-pumps.net/521.html | ||
| Bsanorton |
https://www.youtube.com/watch?v=CdA_B3Io8KI&t=86s | ||
| Jeffb |
Check on the one from S&S. It physically fits, but not sure about pressure. https://www.denniskirk.com/s-and-s-cycle/fuel-pump -for-fuel-injected-custom-bikes-55-5089.p188516.pr d/188516.sku | ||
| Blks1l |
The one that Bsanorton mentioned is only $80.00, don't know what brand pump but it sounds like a good option. http://www.highflowfuel.com/ag-1307437.1305163.130 6676.1306683.1306650-motorcycle-2000-buell-thunder bolt-s3-s3t-touring-efi.html | ||
| Sidv |
FYI-High flow has the pump in stock but regulator is on backorder. | ||
| Blks1l |
I thought they had the kit with pump and regulator for 80.00. | ||
| Sidv |
I ordered the kit from High Flow last week. They sent me an email about the reg and I called them. They said the reg won't be in until late May and offered $10 off. I cancelled the order and found out I need the entire assembly since my tank had some build up in it that fouled everything inside. | ||
| Dutch_x1 |
i once took a x1 fuel pump apart and replaced the rubber seals inside the pump (not sure if i use the correct words for those rubber rings). that was all it took to repair that pump . |
