| Author | Message | ||
     Odd |
I,m putting on the buell race air cleaner and I see it just hangs off the carb. Has this caused any problems as most air cleaners I've seen hang onto the breather bolts | ||
| 1313 |
You are keeping the OE carb support bracket on the bike, aren't you? If so, you'll be just fine. If not, please do! | ||
| Ratbuell |
The carb support wraps from the head breathers, around the carb inlet, and has three screws that go into (and support) the carb. The race intake (which weighs all of about 8 oz.) uses those same three bolts to attach to the motorcycle. You'll be fine. | ||
| Odd |
oops missed that in the instructions and the carb support was not included in the kit I bought.My fault thanks or the help I know I have a support bracket here somewhere. | ||
| Ratbuell |
The bracket isn't for the air cleaner...it's for the carb. It's not part of the kit, it's part of the motorcycle. You should run that regardless of what aircleaner you have. If you've been running the bike without the support bracket, the only thing holding your carb on has been the rubber boot, and the choke cable. Needless to say...you're not supposed to do that. Ever. | ||
| Odd |
I know what your talking about I had a forcewind on it. The bike was never run without some kind of carb support. Thanks again Just a mind fart on my pary | ||
| Mtjm2 |
I have one on my M2 . Was on the bike when I bought it. The carb brace is gone and now I'm worried | ||
| Ratbuell |
You should be. Find one ASAP. | ||
| Kmbuell |
Mark, I've got a spare, how about $20. Shipped to you? Kevin Kmeath34@gmail.com | ||
| Mtjm2 |
Thanks Kevin . I'll hit you up this afternoon Mark |
