| Author | Message | ||
     Buelliedan |
I have asked to buy everything else except the rear fender and the seat. | ||
| Steveford |
Corbin '99 S3 Gunfighter and Lady seat w/ backrest provision, black, good shape, $100. S1 swingarm, axle, adjusters, mounting block and front mount, great shape $150. S1 shock, excellent, $100. S1 header, some scuffing, $30. S1 Vance & Hines carbon cannister, (2" collector), very good condition, $150. Wileyco X1 stainless cannister w/ mounting hardware, (2.5" collector), good shape, $225. Borla carbon cannister, 2.5" collector, no mounting hardware, some damage to carbon fiber from clamps, $150. X1 oil tank, $40. S3 oil tank, $40. X1 seat, 2002, $60. Prices do not include shipping, selling to replace stereo equipment which failed to pass the High Volume Torture Test. Steve Ford Buell1000@netscape.net Brodheadsville, PA | ||
| Steve_mackay |
steveford, Consider the corbin sold... | ||
| 3boyz |
THE PREVIOUS OWNER TOOK THE STOCK SEAT AND HAD A GEL PAD INSTALLED, AND RECOVERED. I THINK FOR RIDER AND PASSENGER. IT LOOKS LIKE IT WAS DONE VERY WELL. IT IS IN EXCELLENT COND. | ||
| 3boyz |
FIREMANJIM, BULLIEDAN EMAILED EARLIER, IF HE DOES NOT WANT THE BARS YOU ARE MORE THAN WELCOME TO THEM. OTHERS THAT EMAILED ME YOU HAVE MAIL. THANKS ALL, ROB | ||
| 3boyz |
I ALSO HAVE A BANKE OIL FILL CAP, THE ONE YOU EPOXY IN THE BASE AND THE CAP UNSCREWS. BRAND NEW. $25.00 ROB | ||
| Firemanjim |
Rob,let me know,thanks, Jim. | ||
| Lake_bueller |
3boyz...I'll take the banke oil cap. Dennis | ||
| Jeffb |
Blast stuff: Swing arm with adjusters for 17" twin wheels +3" $125 S&S head with bracket for center tie bar, black, used - $150 will sell bracket separately for $30 License plate bracket - Eliminates the turn signals and mounts under the seat pan. $20 Manifold to mount ••••• carb on a Blast $35 All of these parts are used and or hand made so they aren't real pretty. Jeff jbailey@sscycle.com  | ||
| Mikej |
Jeff, Goofyassedquestion: will that swingarm assembly bolt up to something like an M2? ques#2: I assume the head you're talking about is the cylinder head and not a swingarm mounting block head, correct? | ||
| Jeffb |
Sorry. I should have been more clear. The Swing arm is for a Blast. The way it mounts to the engine and shock is different than a M2. The head is a front cylinder head that I adapted to fit the Blast. Jeff | ||
| Mikej |
Yep, I know the shock mounts different (background project), just wondering if it was a stock Blast swingarm that was modified or if S&S had a swingarm mounting block now. (I'm playing around in the background with converting the underslung pull shock into a top mounted push shock setup like the Blasts and XB's have.) And you were pretty clear with the pic shown being a Blast.  It was my questions and project that caused the unclarity.  | ||
| Buelliedan |
Nobody wants these one of the XB sticker kits? I'm only asking 25% of what they cost new!!  ddunn@satx.rr.com | ||
| 3boyz |
EVERYTHING HAS BEEN SOLD EXCEPT THE SEAT. THANKS ALL, ROB | ||
| Firemanjim |
Darn.Could have used those controls,just had my Bville bike fall and break the throttle housing. | ||
| Jerry_haughton |
Darn.Could have used those controls... FMJ, you've got mail. FB | ||
| Dj_rider |
ok im going to post this here and in the classified section...i got 2 like new 04 xb rotors and 2 slightly damaged rims (not bent) and a front tire on ebay...once again search for "deejmillz" thanks ladies, fellas | ||
| Johnk3 |
ermax undertail kit is sold. thanks! | ||
| BadS1 |
Djrider ya got a link to that front tire??? | ||
| Shawn_9r |
Bads, hope this works. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=35557&item=249 4962128&rd=1&ssPageName=WDVW |
