| Author |
Message |
    
S1w222
| | Posted on Thursday, November 05, 2015 - 04:48 pm: | 
|
I have a Twintail S1W and I'm putting a solo tail on it, have the subframe, seat and tail section but need to paint the section to match the other bodywork, anyone know where I can buy a can of Carbon Black spray paint? should I clear coat it? have done pretty good work spray bombing before with a lot of prep just need to source the paint. Thx |
Opie
| | Posted on Saturday, March 05, 2016 - 01:14 pm: |
|
Hi Buellies. New to this group and happy to be a part of a local one. I've been getting good advice on Buell XB.com.... I have an 06 1200 XBr firebolt that I bought last fall knowing it had some issues. The main symptom that it has sounds like a familiar one reading other posts. It cuts out at 4000 rpm. So far I have replaced the TPS then reset it. Replaced the o2 sensor on the header, replaced the fan that was bad, replaced the fairly new spark plugs with new correct ones. replaced plug wires and air cleaner. Battery connections are tight. After all this I took it out for a test ride last night and same symptoms were there after a while. Including some cool back fire shots I have ECMspy and am new at it so I'm going to hook-up and look for something. Any suggestions? Thanks for reading. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through March 21, 2016 »
Where can I get Carbon Black Paint in spray can?