G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Phelan Posted on Sunday, February 28, 2016 - 10:11 am:        Selling my EBR front wheel. I bought it to adapt to my Uly project, but the truth is the money would be better spent in other areas of the project. It has very slight scrapes from a loosened brake duct, barely visible. Comes with bearings and spacer. $425 shipped. This is not a bolt-on for XBs, but I have most of the leg work worked out. You need the conversion bearings, which Nathan Allard has a pair for sale, and then you need to mill a few mm from each side of either the wheel or the inside of the fork legs, and from the shoulder of the axle as well (only if you mill the fork legs instead of the wheel), as that the left 25mm OD portion of the axle is extended enough to accommodate the extra width of the wheel. I planned to mill the fork legs, because they and an axle are less valuable than the wheel. Alternatively, you can upgrade to EBR BPF forks and axle, and it will bolt on. I priced this wheel out to buy from EBR while I was at NRHS, and it was nearly $800.   Facing_reality Posted on Sunday, February 28, 2016 - 11:53 am:        I just sent you a PM   Phelan Posted on Sunday, February 28, 2016 - 03:08 pm:        Sale pending   Phelan Posted on Sunday, February 28, 2016 - 04:37 pm:        SOLD

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: