| Author | Message | ||
     Mhlunsford |
2000 m2 I put led front turn signals on my and they flashed too fast for a few minutes. Now no blinking at all. Changed the flasher still no go. I remove one led and still the rear stock turn signal will not blink. Fuses all good. | ||
| Buell_m2_s3 |
You most likely need to get a load equalizer to wire in for them to work correctly. | ||
| Ebutch |
www.ebay.com/itm/261510632698?_trksid=p2060353.m27 49.l2648&ssPageName=STRK%3AMEBIDX%3AIT | ||
| S1owner |
Yes you need a load equalizer google it you can make one for a couple bucks. Or yoi need an Led flasher | ||
| Jayvee |
My turn signals haven't worked for several years, ever since I put in the Kisan Running Lights flasher replacement. Running lights work, but got weak over time. I do hand signals! Seems like most drivers don't know what I'm doing, but sort of intuit it out. Don't ride at night, generally. I do have replacement signals, getting old in my garage. | ||
| Natexlh1000 |
Put the old bulbs and flasher back in and see if they still work. Perhaps the wiring chose this magical moment to bone itself. You may have defective LEDs. | ||
| Buelldualsport |
Rule # 39 There are no coincidences!!! What Nat said |
