Author |
Message |
Atc_no_more
| Posted on Monday, September 15, 2014 - 07:25 pm: |
|
After checking a bunch of items on my intermittently poor running 2008 Uly, I found the source of the problem. The grey connector on the ecm is cracked at a seam. Priced it at the local dealership-$370. Can someone tell me where I might get an OEM replacement online at a better cost? And the service manual says "it will be necessary to download the correct calibration, using DIGITAL TECHNICIAN..." is there a tread that explains this or offers options on ways to do this. I've seen the terms "reflash" and "ecm mapping" on some quickly reviewed threads, but this area of repair is new to me. Thanks.} |
Froggy
| Posted on Monday, September 15, 2014 - 08:04 pm: |
|
You are better off getting the Race ECM for Stock mufflers from Erik Buell Racing. It is cheaper, pre programmed, plug and play, and actually will make your bike run better than it did with the stock ECM. Smoother acceleration, easier starts, smoother idle, little more power, and better fuel economy. http://www.erikbuellracing.com/store/models/xb12/x b12-preprogrammed-ecm.html Once you do get a new ECM, don't install it in the factory location or you will have the same issue down the road. Do a search on here for ECM relocation, there are plenty of threads with suggestions and pictures. |
Atc_no_more
| Posted on Monday, September 15, 2014 - 08:52 pm: |
|
Thanks Froggy. You mean just plug it in and it's ready to go? That would be great! I did see that relocation thread and will do that. |
Atc_no_more
| Posted on Monday, September 15, 2014 - 08:54 pm: |
|
And with a TPS reset too. |
Reepicheep
| Posted on Tuesday, September 16, 2014 - 07:46 am: |
|
The stock ECM is often fixable as well. It isn't rocket science, but it does have to be done carefully. |
Xbimmer
| Posted on Tuesday, September 16, 2014 - 09:58 am: |
|
^^^ Yes, it is fixable. My original 06 ECM failed, replaced it with a 07. 07 started failing, opened up and fixed the 06, put it back in. Recently opened up the 07, the connector joints are failing there too. See my pics here: http://www.badweatherbikers.com/buell/messages/142 838/747295.html?1410827809 (Message edited by xbimmer on September 16, 2014) |
Atc_no_more
| Posted on Thursday, October 02, 2014 - 12:20 pm: |
|
Installed and relocated a new EBR ecm. The Uly is running like the bike I used to know and enjoy so much. And the different fan programing is a big improvement. FYI, the bike had about 24,000 miles on it when it "cracked up at the seams". (Message edited by ATC_NO_MORE on October 02, 2014) |
|