Author |
Message |
M2marc
| Posted on Sunday, May 04, 2014 - 01:09 pm: |
|
my Kit arrived today from DDM. does anyone know how to wire it up. I saw a nice write up on here but is not the same as I need ?
|
Ratbuell
| Posted on Sunday, May 04, 2014 - 09:56 pm: |
|
I find it hard to believe it didn't come with instructions.... Just looking at the photo - red wire, ring terminal = battery +. There should be a similar wire in black, that's ground. From there...just match the terminals. Or...check with DDM. Again - I find it hard to believe it shipped without paperwork. |
S1owner
| Posted on Sunday, May 04, 2014 - 11:38 pm: |
|
Pm me I have a set wired i can draw it up and give it to you tomorrow after work. They come with basic instructions not vehicle specific. |
M2marc
| Posted on Monday, May 05, 2014 - 08:08 pm: |
|
yep. no directions in the box. The website has several write ups but not vehicle specific. im hoping for a plug and play solution. thanks for the offer Ken. ill take whatever help I can get as I am low voltage challenged. if it cant be fixed with a hammer or duct tape its an electrical problem. |
M2marc
| Posted on Monday, May 26, 2014 - 10:02 am: |
|
So I emailed DDM and they referred me to the instructions that are on their site. They said that they are not vehicle specific. that's fine but there are still 5 or more connections that are not described on their site. I would have thought thought they could have had a wiring schematic that shows what wire goes where, what connector connects to what connector. Instead they show a car engine bay and a hand holding a connector and then a basic description, again not every connection is described. Does anyone have a more descriptive explanation or a wiring diagram/schematic? |
|