G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Dave_02_1200 Posted on Sunday, May 05, 2013 - 11:40 am:        I want to buy, rent, borrow, or trade for a tool to remove and replace my front sprocket. The part number is HD-41321.   Nillaice Posted on Sunday, May 05, 2013 - 09:16 pm:        Or go buy a brass hinge from the hardware store I've heard that people have used those with success. Apparently it's just the right size   Littlebuggles Posted on Monday, May 06, 2013 - 04:40 am:        I thought the brass hinge was for locking the primary?   Nillaice Posted on Monday, May 06, 2013 - 10:14 am:        D'oh! sorry, i misread that. you might be able to get away with putting the bike in gear and holding the rear brake. when my '03 belt broke i put a socket on a tooth and wedged it against the frame. worked good enough to get the old pulley off. i had a new '04+ belt and pulleys to install   Littlebuggles Posted on Monday, May 06, 2013 - 01:11 pm:        If you have a belt on the bike, run a 2x4 through the wheel above the swingarm, then gently turn the wheel til the board locks everything in place. Then you can get that pulley off. Reverse the "procedure" when you go to snug it back down. Reverse thread on that nut.   Dave_02_1200 Posted on Monday, May 06, 2013 - 04:44 pm:        I just found the tool and bought it. Thanks for the ideas and support. Cheers, Dave

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: