G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   S1owner Posted on Sunday, April 28, 2013 - 05:54 pm:        I am trying to install a 2000 era Nissin rear caliper i bought from a fellow bad webber but can not figure the pad install out please help? What are these clips and how do i install   Akbuell Posted on Sunday, April 28, 2013 - 06:47 pm:        Rotate the copper colored one 180deg clockwise, and then place it in the recess in the top of the caliper. The silver one goes between the pads at the mounting pin. It should have a groove in it that fits over the pin, on the inside of the pin. Hope this helps, Dave   S1owner Posted on Sunday, April 28, 2013 - 07:03 pm:        Is this correct?   Akbuell Posted on Sunday, April 28, 2013 - 07:30 pm:        Looks right to me. Sorry about the instructions re the silver one; I looked in the service manual and not at the bike.   S1owner Posted on Sunday, April 28, 2013 - 07:45 pm:        Thanks installed and seems to be correct

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: