| Author | Message | ||
     Maxbuell |
Are replace keys still available. I am down to my last one. Can key makers cut barrel keys? any info please would help.. | ||
| Jolly |
I needed keys last summer and took the key code in to the local HD shop, gave them the number on the key and they cut another one. I had another one cut at a local bike rally, one of the booths was a key cutter for barrel keys. | ||
| Onebadx1 |
Yes. Take to a locksmith/key shop. | ||
| Blackm2 |
Depends on the keymaker, and if they have the barrel key blanks. There is a hole in our keys that a spring loaded ball pops into when you turn it to keep it there so it doesn't fly out while your riding. I had to drill it on mine based on my original because the blank my keymaker had did not have the hole. | ||
| Ratbuell |
You should be able to go to a dealer and say "I have key code XXXX" (pull the plastic cover of your key, and its stamped in the metal underneath), and they can order you a new set/pair. | ||
| Natexlh1000 |
The blank is the same as sportster of that same vintage. The key will most likely say harley under the plastic cover. I think you can get a pair of new keys from H-D if you give them a VIN. | ||
| Onebadx1 |
Don,t dick around with ANY dealer! If you have a good key, take it to a locksmith. They'll make you a copy. NOT A HARDWARE STORE. End of story. |
