G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Rsm688 Posted on Wednesday, February 06, 2013 - 07:25 pm:        Well I am trying to figure out a fork swap and was wondering if someone with an S1 or S1W could take some measurements for me. I am trying to see what the fork tube diameter is at the lower triple clamp and also the distance between the two tubes (from the center of the right fork tube to the center of the left tube). Any help would be greatly appreciated thanks, spencer   Brother_in_buells Posted on Thursday, February 07, 2013 - 01:24 pm:        Measured from x1/s1 triple clamps with digital vernier caliper. forktube diameter from lower clamp 53.98mm (upper and lower clamps have the same forktube diameter) Distance between the two tubes from center to center 194.76mm distance between the forktubes inner-side to inner-side 140.76mm distance on outside of forktubes 248.76mm Hope this works for you, Keep on tinkering!   Rsm688 Posted on Thursday, February 07, 2013 - 01:35 pm:        Thanks a ton that is exactly what I needed, now I gotta go do some math and see what I can figure out. Thanks for the help -spencer-

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: