| Author | Message | ||
     1313 |
Some basic ground rules: - Prices, unless otherwise stated, are shipped to the lower 48 states. - Prices are a starting point. If you feel they are not in line, don't worry about offending me and please send me a PM with what you feel is in line and we'll work together to see if we can reach a point where we're both happy. - Parts will not be packaged until sold, so any further information needed (pics, further inspections, etc.) will be a piece of cake (NO, none of the parts will come with a piece of cake...). - YES, I do receive my PM's. So there should be no worries about whether they will be received or not. ZTL2 front brake line: Brand new, complete in the box ZTL2 front brake line including both banjo bolts and all sealing washers. OE on '09 XB1Ss and would be perfect for converting to ZTL2 on an '08 XB12STT (or anything running the XB12STT length forks). Originally when the ZTL2 stuff hit, Buell's website had an error in their compatible model listing. I bought this for my XB12XT, but it was just a tad too short for me to feel comfortable using with the XB12XT's long forks and the Lightning bars I put on my XB12XT. I'd like $35 shipped for the ZTL2 front brake line.     XB front isolators: Brand new, never used. These don't match what's on my XB12XT, so I see no reason in me holding onto them. Both have "L0501.02A8" cast into them with "A/C" stamped after, for complete part numbers of L0501.02A8A or L0501.02A8C. Not sure what to make of that, so hopefully they'll match what's on your bike. I'd like $40 shipped for each front isolator.    XB12X triple tail: The standard Uly triple tail. The Uly XT triple tail only differed by having a different graphic that said "XB12XT" on it instead of "XB12X", so it will also fit a Uly XT. Definitely slightly used, but with a little cleanup it should look as good as a new part. I'd like $75 shipped for the triple tail.   XB (of some flavor) top triple clamp: This top triple clamp, which is definitely used, looks to be for a Lightning or Uly and has "J0105.1ADA" cast into it and comes with all the pinch bolts. Based on how long I've had the triple clamp, I'd wager on it being a Lightning part but please let your parts book guide you. Since it's not packaged up, I can most certainly take any simple measurements that you desire. I'd like $50 shipped for the top triple clamp.     ZTL front brake setup: This ZTL front brake setup came off my XB12XT at 20,002 miles when I upgraded to a ZTL2 front brake setup. There are some slight deviations to it as to how it normally comes on the XB12XT. The first is that, due to the Lightning bars I put on my XB12XT, I had to route the front brake line with an S-bend and move the location of the protective black rubber hose. Neither of these should affect use on another XB12XT. The only other deviation from OE is that it currently has a tweaked ZTL2 lever with ZTL saddle. It's not recommended to use this setup, but they're the lefotvers from the ZTL lever with ZTL2 saddle that I put on my XB12XT. The simplest way to correct this would be to replace the lever assembly with a complete ZTL lever assembly. I'd like $100 shipped for the complete ZTL setup. For $50 more, I'll throw in the front rotor that I removed when I went ZTL2. There's absolutely nothing wrong with the rotor, I just wanted to start with a completely new system when I upgraded to ZTL2. I don't have any pics of the front rotor right now, but can easily take some and take any measurements desired.     Thanks for your help in cleaning out my garage! 1313 | ||
| Ratbuell |
Can you describe (in 50 words or less...lol) what the "difference" is between the iso's you have for sale, and the iso on your bike? 30k on my 06 X and I'm thinking I should probably have a spare kicking around just in case... | ||
| Abenormal |
PM sent re: brake line | ||
| 1313 |
Abe, PM replied to. Joe, 50 words or less, how's this? Not the same.  You already knew I was a smart ass, so I don't know why you tempted me like that... So I guess I have 47 (or less) left... Seriously, the biggest difference I could see is that, where the isolator bolt goes into the isolator on my bike, there's rubber below the Aluminum of the mount. Essentially it's like the rubber on the isolator on my bike has a flange. Hopefully that helps you Joe, 1313 | ||
| 1313 |
ZTL2 brake line SOLD! Thanks Abe! 1313 | ||
| Ratbuell |
Mine has a rubber washer as well. Sure that's not part of the frame-side of the iso assembly? Or part of the bolt/washer setup? Dammit. Now I have to go find my FSM... | ||
| Brother_in_buells |
The front isolators on pics are the early ones 02-04 maybe 05 ,both my 04 xb's has these one failed so replaced it for a used 06 i already had. there is a rubber washer glued on the bolt to. early style ,but fit the later xb's to  later style ,but fit the earlier xb's to  sorry for the thread-jack (Message edited by Brother in buells on January 21, 2013) | ||
| Ltbuell |
I call dibs on the top triple,but i need to check if its an early year one or not.If its an early year,then def yes.I have to call around tomorrow.That ok with you?LT | ||
| 1313 |
LT, Perfectly fine with me. I want the new owner to be just as satisfied with their new (to them) part as I will be satisfied clearing some space in my garage. Please report back on what you find as it will likely help out others, whether it's a definite yes for you or not. However, I just found this post from Al from 2005, the last post on this thread that might be helpful information for you. Let me know what shakes out, 1313 | ||
| Ratbuell |
Since it looks like they interchange and are just an earlier revision...I'll take one of the iso's to have around as an emergency spare  Email me and let me know where to send some fundage...thanks! | ||
| Noone1569 |
Anyone confirm that those isolators would fit an 05XB12R? Mine's been blown since I bought the bike. If it fits, I'll take it. | ||
| Ltbuell |
I'll take it.I'm trying to do a project on my '00 X-1 Lightning( see if its a doer).If not i can always resell it...or slowly piece together an XB front end onto it like most have done or are in the process....Anyway.....the zip is 89410 and i'll send you a pm with the mailing info.Thanks for that thread...Al really knows his stuff.I try to send people to him for "goodies".LT | ||
| Ltbuell |
1313...sent you a pm.LT | ||
| Ratbuell |
money sent | ||
| 1313 |
Updates: Both isolators are sold. LT, I responded to your PM last night. Thinking back it seemed like my Email was acting up when I hit send, so I sent another this morning. Thanks all! 1313 | ||
| Ltbuell |
1313..got your pm and you got one now.LT | ||
| Abenormal |
Brake line received, thanks 1313! | ||
| Ltbuell |
You got $$$$$$$$.... | ||
| 1313 |
Excellent news, Abe! Thanks again! LT, will go out tomorrow! Some further updates are necessary: - Both isolators SOLD. - Triple clamp SOLD. This leaves the following parts still available: - Triple tail - or beaver tail to some elves... - Front brake set up with or without front rotor - your choice. Thanks to all the new owners! 1313 | ||
| 1313 |
Pricing update! - Triple tail/beaver tail $65 shipped to lower 48 - Front brake setup; $85 without rotor shipped to lower 48, $130 with rotor shipped to lower 48 There's still some clutter that can be eradicated from my garage, 1313 | ||
| Noone1569 |
Received the Isolator the other day. Thanks again! | ||
| Ltbuell |
1313- i got the upper triple yesterday.You pack stuff like i do....the right way.Thank you.Have a great weekend.LT |
