| Author | Message | ||
     Jonesgw |
I've ordered most of the parts for the Stator rework but does anyone know if any gaskets should be ordered that I may not be aware of for the fix? Thanks | ||
| Sparky |
Stator (Ignition) cover gasket for sure just in case you ruin the original one. If you have to remove the muffler to install the Crank Locking Tool, then maybe the gaskets between the head pipes and muffler. | ||
| Jonesgw |
Roger that.. Thanks Sparky | ||
| Cuso4rox |
I am currently in the process of changing my stator its already out and on its way to custom rewind, the cover gasket needs to be replaced but I am having a hell of a time finding one any info would be greatly appreciated..... | ||
| Zac4mac |
I am pretty sure Mancuso will have the gasket or be able to order it. check the main store first. Has to be a Harley dealer that hung on to its Buell service designation. If you need work done, I would take the bike to Austin to Cowboy. At least that's what my brother does with his XB. he lives in Katy. Zack | ||
| Kalif |
how did you contact to Custom Rewind? i cannot find their e mail. have you got any of their contacts thank you | ||
| Zac4mac |
Kalif - try this address mail@customrewind.com Good luck Z | ||
| Cuso4rox |
the best way to contact custom rewind is to call Gary at 800-798-7282 put your stator in a box with a check for $140.00 send it out to them and thats that.... | ||
| Sprintst |
I had mine on and off about a half dozen times before I tore the original gasket Glad I had a new one Wish I had the header/muffler gaskets, since they are fragile, got a bit roughed up, and the job would have been easier with new ones (Message edited by sprintst on December 13, 2012) |
