G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ripdog28 Posted on Thursday, March 14, 2013 - 10:18 am:        I added a D&D pipe a while back and it ran OK with the stock ECM but it has a stumble in the 3k range. I just put a EBR D&D ECM and an open air box on it. After a few short rides and a good 30 min ride above 3k it seemed to run better when i would pull hard from 3k but if i accelerate slow it stumbles several times from 3-4k then is fine. This is really noticable in 3rd gear but not really noticable in any other gear. not sure what it is at this point. I have 20k on it and no problems except the stumble.   Xoptimizedrsx Posted on Thursday, March 14, 2013 - 07:41 pm:        cylinder offset in the fuel mapping. your bike is asking for more on one and less on the other in that cell area to refine it a tad further. You can fine tune it with a couple datalogs.   Ripdog28 Posted on Friday, March 15, 2013 - 11:55 am:        Thanks Xopti, That is what I thought is it needed a few long rides. Should I ride in the area of the problem, 3rd/3-4k? or just 5th above 3k?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: