| Author | Message | ||
     Uly_man |
I have been looking over a EBR ECM for the 09 bike and yes its the same as any other of its type. It has just been tuned for the can you want. If you have one for a pre 08 bike then you can do the TPS reset as well as other things. I have also started to compare these two ECMs but I have only got as far as the scalars. These are the ones that are not the same. They, of course, will not be the same but I did notice that the EBR has the raised fuel acceleration enrichment that I did and worked so well on my bike. STOCK EBR ECM BUE2D242 BIN FILE TO STOCK 2010 BUELL ECM BUE2D252 BIN FILE - SCALARS DIFFS. EBR ECM FOR USA 09 XB12. BUELL ECM 2010 DUEL O2 SENSOR EU/UK BIKE WITH SMALL HEADERS AND CAT IN CAN. 1) DECELERATION LEARN MAX RPM. EBR 9000 RPM. BUELL 5700 RPM. 2) SHIFTER INPUT. EBR 1. BUELL 17. 3) THROTTLE POSITION SENSOR RESET VOLTAGE. EBR 0.240. BUELL 0.260. 4) DECELERATION LEARN MIN RPM. EBR 8500. BUELL 4000. 5) VEHICLE SERIES CAL ID. EBR 0. BUELL 2. 6) VEHICLE MARKET CAL ID. EBR 0. BUELL 2. 7) VEHICLE CAL VERSION, EBR 0. BUELL 12. 8) O2 SENSOR LEAN VOLTAGE. EBR 0.415. BUELL 0.317. 9) O2 SENSOR RICH VOLTAGE. EBR 0.562. BUELL 0.659 10) FUELL PI CONTROLLER HIGH LOAD THRESHOLD. EBR 55. BUELL 35. 11) FUELL PI CONTROLLER LOW RPM THRESHOLD. EBR 2350. BUELL 2150. 12) FUELL PI CONTROLLER HIGH RPM THRESHOLD. EBR 3100. BUELL 2350. 13) FUELL PI CONTROLLER LOW LOAD THRESHOLD. EBR 29. BUELL 24. 14) FAN KEY-OFF ON TEMP. EBR 190. BUELL 220. 15) FAN KEY-OFF OFF TEMP. EBR 170. BUELL 200. 16) FAN KEY-ON OFF TEMP. EBR 180. BUELL 195. 17) CLOSED LOOP LOWER BOUNDARY RPM HYST. EBR 50. BUELL 35. 18) CLOSED LOOP LOWER BOUNDARY LOAD HYST. EBR 3. BUELL 2. 19) CLOSED LOOP MIN ENGINE TEMP. EBR – 40. BUELL 38. 20) IDLE MAX ENGINE SPEED (RPM). EBR 1900. BUELL 1850. 21) FULL ACCELERATION CONDITION, EBR 22.800. BUELL 24.300. 22) CALIBRATION MODE MIN ENGINE TEMP. EBR 150. BUELL 130. | ||
| Buewulf |
Thanks Ulyman. Good info. |
