| Author | Message | ||
     Odd |
so my ecm is cracked and I'm going to buy a ebr one for my 09 xt. I'm looking for the thread for relocating it.Do you have to relocate all Buell ecm, lighting, firebolt, or is this just a ulysses problem? | ||
| Thejosh |
Not sure if it's Uly specific, but the Uly does have a different seat frame. I looked into the ECM relocation after I installed my comfort kit, considering the fan shroud is Uly specific; I don't thing the other models have as much room, but that's just me. | ||
| Nallac |
It's Uly specific. plenty of threads around about doing the relocation. | ||
| Motorbike |
Try this: http://www.badweatherbikers.com/buell/messages/142 838/629631.html?1303991777 and this: http://www.badweatherbikers.com/cgibin/discus/disc us.cgi?pg=next&topic=142838&page=629631 | ||
| Odd |
yup I found the threads, thankyou, I have the new ecm, two days to get it very fast. The bike is a 09 do I have to do a tps reset or is it plug and go? | ||
| Natexlh1000 |
You should do that manual TPS reset that 2008 and up bikes have. Turn on ignition without starting the bike and slowly open and close the throttle..... What is it? 3 times? 5 times? Someone help me out here..... Anyways, you should probably do it again once the bike is at operating temp too. I'll probably be doing this over the winter myself. | ||
| Xbkris |
Post up your results after you get settled in with the new ecm as I would like to know if you could tell any performance difference? | ||
| Odd |
new ecm, very smooth running bike now! A lot less heat comming up on my leg and the the fan program is much better than the stock program. Well worth it! |
