| Author |
Message |
    
Jstav2012
| | Posted on Monday, September 24, 2012 - 07:07 pm: | 
|
jstav@hotmail.com
In desperate need of your throttle fixer upper. For some reason, PMs do not seem to be working for me. Thanks! |
Tootal
| | Posted on Monday, September 24, 2012 - 07:43 pm: |
|
I've e-mailed you twice but I'll bet it's going in your spam file. Check your file and see if I'm there. Anyway, I need your name and address. I'm getting your PM's. Will ship tomorrow if you get it to me. |
Jstav2012
| | Posted on Monday, September 24, 2012 - 08:25 pm: |
|
That's weird, I don't see you in the Junk folder, nor anywhere else. I just PM'd my name and address to you. Really appreciate what you've done. |
Tootal
| | Posted on Monday, September 24, 2012 - 08:31 pm: |
|
Got your PM. Will ship tomorrow and will expedite. I'll let you know what the total cost is. I'll try e-mailing you from my work address tomorrow. Sorry for the problems, don't know what's going on. |
Jstav2012
| | Posted on Monday, September 24, 2012 - 08:46 pm: |
|
Thanks Very Much! I did have some blocked domains and addresses in my hotmail settings, so maybe try one more time to send me an e-mail. I just sent one to myself from my work address, and I got it very quickly.
Do you know if it is even possible to put this in without removing the throttle body? I would like to do it that way, but if not, I'll buy the tools I need to get it out without rotating the engine. |
Schwara
| | Posted on Monday, September 24, 2012 - 08:58 pm: |
|
I had lots of problems with Hotmail ... without using filters at all. My Hotmail did not like PMs at all and would occasionally drop other BadWeb messages at random. I went to Ymail (Yahoo) with no problems since. |
Davis_bueller
| | Posted on Tuesday, September 25, 2012 - 06:50 am: |
|
Yes the throttle body must come off. No rotation needed. Get intake seals also. Not as hard as you think,but you don't want to do it again. Good time for plug wires too. |
Cmgaviao
| | Posted on Tuesday, September 25, 2012 - 10:33 am: |
|
throttle fixer upper? do I need one? |
Natexlh1000
| | Posted on Tuesday, September 25, 2012 - 04:45 pm: |
|
They are talking about the throttle body shaft.
The stockers sometimes break.
Tooootal had a bunch machined up much beefier than stock.
The only other alternative is to buy a whole new throttle body assembly. |
|
