Author |
Message |
1125rcya
| Posted on Wednesday, August 08, 2012 - 04:07 pm: |
|
Once I have the front and rear wheel bearings pulled out, will they be reusable? |
Sprintst
| Posted on Wednesday, August 08, 2012 - 05:50 pm: |
|
No, replace Bearing are typically removed by pressing/pulling the inner race, which transfers the load across the balls to the outer race, which is the part that's pressed in this can damage the balls and the race when installing, you press only on the outer race, so there isn't the same stress while they may survive removal, that would be false economy |
|