| Author | Message | ||
     Ratbuell |
..and it's not in the parts lookup, because it's a part we're not supposed to know is there. Grrrrr. I need the o-ring that goes on the air/fuel mix needle. You know, the one that we have to drill the plug out to get to, and turn it 2.5 turns out. Anyone got a crossover part or source? Or am I getting creative with some RTV to try and "un-flatten" it? And no...the diaphragm o-ring won't work, too large (diameter) and too tall.  | ||
| Zenbiker |
I feel your pain Rat, I was in the same dilemma and ended up pulling it from an old carb I had laying around. Kawi uses the same carb on a lot of models, they may be a resource, or even harbor freight. good luck! | ||
| Bigslug |
Rat, PM me your address, and I'll get you one in the mail. I needed one a while back and bought a whole pack from McMaster Carr. Mike | ||
| Ratbuell |
I'll do ya one better - just send me the part number. I'm rebuilding enough for other people these days, I might as well have a stash of 'em on the workbench  | ||
| Bigslug |
www.mcmaster.com 1mm x 3mm viton O-ring p/n 9263K511 Mike | ||
| Ratbuell |
Awesome! just ordered 25, thanks |
