Author |
Message |
Reducati
| Posted on Tuesday, August 07, 2012 - 12:39 pm: |
|
my cr mirror...its that star type bolt, and i need to go to the store to get one...anyone know the size wrench or t or what ever its called! thanks |
Reducati
| Posted on Tuesday, August 07, 2012 - 12:49 pm: |
|
tork size i need... |
Reducati
| Posted on Tuesday, August 07, 2012 - 01:00 pm: |
|
make that torx...duh!!! |
Boogiman1981
| Posted on Tuesday, August 07, 2012 - 01:12 pm: |
|
probably a 30 but i don't have a cr |
Reducati
| Posted on Tuesday, August 07, 2012 - 01:16 pm: |
|
30 to small |
Reducati
| Posted on Tuesday, August 07, 2012 - 02:23 pm: |
|
Two trips to autozone...its not a 40...but a 45:-) |
Boogiman1981
| Posted on Tuesday, August 07, 2012 - 02:52 pm: |
|
was just a guess my R doesn't wear mirrors anymore and iirc it was a 12mm wrench to get them off |
Zac4mac
| Posted on Wednesday, August 08, 2012 - 10:31 pm: |
|
10mm Now that I think about it, aren't the disks and sprocket held with T-45 also? (Message edited by zac4mac on August 08, 2012) |
Slaughter
| Posted on Friday, August 10, 2012 - 07:59 am: |
|
If you work on your own stuff and DON'T have a set of torx drivers, it's time to get a set. Also if you're only doing non-critical work, you can "cheat" and use an allen wrench (assuming you have both SAE and Metric so can find one that fits close) |
Boogiman1981
| Posted on Friday, August 10, 2012 - 05:40 pm: |
|
thanks zac it's been over 2yrs since i took them off |
|