G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Razz Posted on Thursday, May 17, 2012 - 08:52 pm:        Doing a tire change front and back and need torque values for both axles and pinch bolts.I know I should have a shop manual but have just recently purchased Madstad screen and brackets,comfort kit,clutch cable,lowering collar and two new tires.My wife says I am cut off for a while.To top it off ,after bike trip in the rain last weekend my muffler broke out in rust all over.Can't afford new one so will probably remove it and paint it at the same time.Any help would be greatly appreciated. The bike is an 09 XT   Rdkingryder Posted on Thursday, May 17, 2012 - 08:56 pm:        Tighten axle to 23-27ft-lbs, back off two turns, tighten to 48-52ft-lbs. Pinch bolt is 40-52ft-lbs. When I did mine, I only tightened the axle bolt to 39ft-lbs to try to see if that would prolong the bearings.   Calamari_kid Posted on Friday, May 18, 2012 - 03:12 am:        I think you meant 40-45 on the pinch bolt, yes? That's what I've got in my service manual.   Rdkingryder Posted on Friday, May 18, 2012 - 08:23 pm:        Oops, your right, had a brain fart.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: