G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Canxb Posted on Monday, April 09, 2012 - 07:31 am:        Hello all, I have an email in to Kevin at KDFab but was looking to you folks to see if anyone has any other insight to offer. Has anyone removed the rear 2 band clamps without removing the idler pulley/tensioner? If so do you also have any tips on putting it back together so it is easier to get to those nuts on the clamps? Any advice or direction would be greatly appreciated. Joe   Sticks Posted on Monday, April 09, 2012 - 08:11 am:        I think? that I just used a 6" extension, it's been a while but I don't think you need to take off the idler. I used to run a Drummer. Stock is the same too as far a accessing those clamps. It makes life lots easier next time if you do turn the clamps around so you can get at them as you suggest. I turn them around so you get at them from the left side of the bike.   Munarin Posted on Monday, April 09, 2012 - 07:03 pm:        Easiest way is to use a 1/4 inch drive, 11mm deep socket and 6" extension. Place the clamps and nuts on top and the extension will slide in between the belt and idler no problem.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: