Author |
Message |
Xl1200r
| Posted on Tuesday, November 29, 2011 - 12:42 pm: |
|
Mine is bent - figured I'd put this here in case someone sees it who may not look in the classifieds section. Mine is bent, not much, but enough that you can see it if you look at it hard enough. Needs to fit a 2002 S3, so I'm assuming anything from a 1997-2002 S3 or M2 will fit the bill. Oh, and it needs to not be bent |
5liter
| Posted on Tuesday, November 29, 2011 - 07:34 pm: |
|
If you have the dough, get the billet one from American Sport Bike. |
Brinnutz
| Posted on Tuesday, November 29, 2011 - 11:13 pm: |
|
Just upgrade to the Billet one...stops those problems you're having.... |
Xl1200r
| Posted on Wednesday, November 30, 2011 - 10:02 am: |
|
It's that definative of a solution, huh? I may just bite the bullet. What do I do about the little nub that supports my air cleaner? The billet ones don't have that. |
5liter
| Posted on Wednesday, November 30, 2011 - 12:13 pm: |
|
Couldn't tell you about the nub, as I've got the race air cleaner. |
Brinnutz
| Posted on Wednesday, November 30, 2011 - 12:15 pm: |
|
ditto |
Xl1200r
| Posted on Wednesday, November 30, 2011 - 01:16 pm: |
|
I've emailed Al to see his input on it. May not even be a concern... |
Brinnutz
| Posted on Thursday, December 01, 2011 - 11:29 am: |
|
There's this one from the UK as well. http://www.ebay.com/itm/Buell-Front-Engine-Mount-C NC-Machined-Billet-/230710879989?pt=UK_Motorcycle_ Parts&hash=item35b770a6f5 I went with NRHS one though. |
Mmmi_grad
| Posted on Tuesday, December 13, 2011 - 08:46 pm: |
|
i fixed mine no problem and replaced with OEM motor mount, no problem for years. |
|