G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Hogluvr Posted on Monday, August 01, 2011 - 08:38 pm:        I need to replace the gaskets on my leaking rocker boxes, is there an easy way to find TDC? I did this on my ex's Blast and remember it was a pain in the a$$ to see if the valves were both closed through the spark plug hole. There has to be an easier way...   Outdoors Posted on Monday, August 01, 2011 - 09:26 pm:        I just took the covers off and with it in 5th gear, rotated the rear tire until both rockers were raised (hence valves closed) on the head I was working on. The job went pretty smooth and no more leaks.   Desertguy Posted on Monday, August 01, 2011 - 09:34 pm:        Ditto Outdoors. Also it is a good idea to use your fingers to "square up" the middle cast assembly to the top valve cover before tightening.   Hogluvr Posted on Tuesday, August 02, 2011 - 07:48 pm:        Thanks, that makes total sense. I knew there had to be an easier way!   Ratbuell Posted on Tuesday, August 02, 2011 - 09:49 pm:        um...pull the timing plug out of the base of the V on the right hand side of the motor, and look for the mark. Big honkin' allen bolt. Can't miss it. Right there in the middle, by the base gaskets.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: