| Author | Message | ||
     Duff24 |
WTF!! I went and installed an HID kit on the R today and wanted to just do the low beams. I looked at the manual to see which ones were supposed to be low beams because I forgot to check. The manual is freakin WRONG. The low beams are on the INSIDE and not the OUTSIDE. It's a pain in the ass to redo it all. Bastards...... /rant  1. Low beam bulb 2. High beam bulb 3. Position lamp bulb (Message edited by duff24 on October 02, 2010) | ||
| Duff24 |
I guess my question is, if the owner's manual is right, why are the high beams always on as the running lights? | ||
| Tippster |
^^Exactly | ||
| Americanmadexb |
I did the same thing when i did my HID install. Since i already cut the holes out on the rubber boots, i used a rubber grommet and glued them in. | ||
| Froggy |
At least it isn't the wrong torque spec for the drain plug. | ||
| Duff24 |
^^ doh! Glad to hear I'm not the only one..... Finally got over it and redid everything. Just glued the holes back in place that I cut out. Turned out good. (Message edited by Duff24 on October 03, 2010) |
