| Author |
Message |
    
Trev_dawg2
| | Posted on Wednesday, September 15, 2010 - 11:22 am: | 
|
so, as i posted earlier, i finally figured out why my bike wouldnt run right until it was hot. the cold start enrichment was a tad too high and so lowering it made it run smooth quicker. however, when i first start it up it enriches to 150ish% at first start up and then quickly lowers to 110 or so. is it supposed to start this high or would this be the 02 sensor malfunctioning? i guess i never looked at what it was doing before and so i dont know what the "normal" should be. it ran pretty rich before i was able to work on the mapping so i dont know if maybe that screwed up the sensor. i would like to find out how to get this to work since it wont idle at at all and i dont much like it running this rich, even for a few minutes. |
Kalali
| | Posted on Wednesday, September 15, 2010 - 11:39 am: |
|
If you look at the CSE table you can see the mapping between the temperature and the % enrichment. 150% seems about right for a cold start. |
Nallac
| | Posted on Friday, September 17, 2010 - 03:42 am: |
|
The last time i checked my cold start(yesterday) it was @178%, Air temp was about 8deg Celsius/46F. |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through February 02, 2011 »
No idle. Advice Please!